MR005M Hydraulic Bench Educational Equipment Mechatronics Training Equipment
The picture is only for reference
Designations and Technical Data:
- Set of didactic equipment for the study of basic hydraulics, electro-hydraulics, proportional hydraulics and hydraulic regulation. - Double-sided mobile workstation allows the assembly and operation of individual components without the use of tools (components equipped with quick assembly system) The workstation must be equipped with:
- 1x Mobile cart on wheels with dimensions ±10: · length 1540mm, . height 1760mm . minimum depth 770mm - 1x Double-sided plate for easy fixing of dimensioned components · length1080 mm minimum . depth 680 mm minimum - 1x double-sided front panel for inserting electrical components - 2x Fixed cabinet with at least 3 drawers - 2x Rubber oil drip tray - 1x Cable guide - 1x Hose holder Set of equipment for the study of hydraulics and electro-hydraulics
- 1x 4/2-way valve with manual operation and spring return - 1x Manually operated 4/3-way valve, Y-center - 1x 4/3 manually operated dispenser, closed center - 1x Check valve - 1x Pilot operated check valve - 1x Direct operated pressure relief valve - 1x bi-directional flow restrictor - 1x one-way flow restrictor - 2x Double acting cylinders piston diameter 25mm, rod diameter 16mm maximum and a stroke of 200mm minimum - 1x Mounting kit for cylinder - 1x Hydraulic motor with torque drainage 60 Nm
- 1x Load weight of 15 kg maximum with mounting adapted to the cylinder delivered assembled in a grid for safety purposes - 1x hydraulic membrane accumulator with locking diaphragm. - 3x Pressure gauge with quick coupling and glycerine bath pressure range 0- 100 bar - 2x T-distributor with quick coupling - 1x Shut-off valve - 2x Module of 3 electrical relays (contacts 3NO-3NC for each relay, coil 24 VDC) - 1x Module of 3 electric push buttons - 1x Module of 2 timer relays (2NO-2NC contacts) - 2x 4/2 monostable electrically driven 4/2 directional control valve (24 VDC coil with excitation indicator light) - 1x 4/3 spool valve with closed center, electrically controlled (24 VDC coil with excitation indicator light) - 1x Electronic pressure switch - 2x Electronic proximity switch
Set of accessories - 10x Hose with quick couplings, 600 mm - 6x Hose with quick couplings, 1000 mm - 4x Hose with quick couplings, 1500 mm - Set of 4 mm safety laboratory cables (red and blue color) consisting of at least 80 cables - Power supply unit for mounting frame 220V AC - 24VDC / 10A maximum short-circuit protected.
Hydraulic power unit
- Control unit with integrated circuit breaker and emergency stop - Single-phase alternating current motor - Rated voltage: 230 V/50Hz - Rated power: 1 kW minimum - Coupled to 2 double pumps (gear or vane pump) - Flow rate of each pump: 3.5 l/min minimum - Pressure 50 bar minimum - Tank capacity 40 Liter minimum with return channel filter.